Information About MonoSeal
Description and application
MonoSeal is a liquid, hand-applicable waterproofing membrane based on pure polyurea with 3GTX technology. It cures to form a seamless, durable, and weather-resistant waterproofing solution with an elongation of 1530% with excellent thermal stability.
If desired, MonoSeal can be littered in the second layer with fully dried quartz sand to achieve an anti-slip finish. This can then be finished with a UV-resistant top coating. It is also possible to apply an anti-slip coating directly on the membrane.
Properties
Cold applied with a roller, brush, trowel, or squeegee, ideal for applications where an open fire is prohibited
No reinforcement fleece needed because of 3GTX Technology
Seamless waterproofing technology, no risk of leaking joints
Can be applied on almost any surface, sometimes combined with a primer
No aging based on UV light
Good chemical resistance
Does not contain plasticizers, therefore permanently elastic
Crack bridging with an elongation of 1530%
Vapour permeable (breathable)
Walkable with high and low temperatures
Excellent thermal stability up to 90 c
Not sensitive to temperature and moisture
MonoSeal installation
Applied to a clean surface, including cleaning and ensuring that the substrate surface is clean and free of dust and grease.
. Monoseal should always be mixed mechanically, preferably with variable mixing equipment with a suitable mixing tool.
Mix the hardener for 30 seconds
Add the hardener component to the base component.
Mix both components intensively (2-3 minutes only) in such a way that a homogeneous, even-looking mass has been created.
Apply cold polyurea, with a brush or roller, or squeegee.
